BIX® TSP Substitute Concentrate (Discontinued)

For the fastest cleaning and surface preparation, use this no-rinse one-step formula to prepare your surfaces for repainting or refinishing. It is recommended to bond old enamel, oil-based or latex paint, varnish, or lacquer finishes to new coatings, or before wallpapering.


1. MIX: SHAKE WELL BEFORE USING. Wear chemical resistant gloves and chemical splash goggles. Mix 1 quart of concentrate with 4 quarts of warm water in a plastic pail, or add full strength to pressure washer.
2. APPLY: Apply from bottom to top, using a cloth, sponge, or sprayer.
3. WAIT: When using on greasy or dirty areas, allow to sit for a few minutes.
4. REMOVE: Wipe off with a clean dry cloth, turning and changing cloth often to avoid smears.
5. DRY: Dries fast. Refinish or repaint when dry (or within a week) before soiled again.

HELPFUL TIPS: Recommended for hard surfaces only. Do not use on porous or non-washable wallpaper, raw wood, glass, ceramic tile, polished aluminum or vinyl flooring. Do not use on glossy surfaces you do not intend to paint. If accidentally splashed on glass or aluminum, rinse immediately. Allow surface to dry completely before painting. Always test first on an inconspicuous surface for compatibility on areas not to be refinished, as it will degloss most surfaces. Close cap tightly after each use. Store and transport in an upright position.

DANGER: MAY CAUSE BURNS TO EYES. SKIN IRRITANT. HARMFUL IF SWALLOWED. Contains Sodium Metasilicate and 2-Butoxyethanol. Avoid contact with eyes and skin. Do not ingest.

FIRST AID – IF SWALLOWED, call your poison control center, hospital emergency room or physician immediately for instructions. IN CASE OF EYE CONTACT, immediately flush with water, remove any contact lens and continue flushing with water for at least 15 minutes, then get immediate medical attention. IN CASE OF SKIN CONTACT, irritation may result. Immediately wash with soap and water. If irritation persists, get medical attention.


MAX V.O.C 4% by weight

The “Directions for Use” are included to help you better understand our product. However, they do not provide you with all of the information needed to use the product safely and effectively. Prior to using any of our products, you should always read the entire label including all cautions. A copy of the current label is linked to this webpage.